A new style of jetting for resin heads. This head has four jets at the face of the lure that run into a mixing chamber, from there water/air exits one large circular jet that is just before the skirts. The final jet is shaped like a valve on an engine cylinder head. Smokes like no other lure. the body of the lure stays clean while the smoke exits in a thick fog out of the valve like jet at the rear of the head just before the skirts.

This is still a very new lure not many out there being pulled. I had a billfish strike on my personal Saturn 5 in the “Electric Pearl” color. I love the action of this lure, it is going to be a big producer. I pull it on the short rigger.

All resin, no added weight.

BOM 502 skirt size

She’s not the skinniest girl in the spread. At 13” overall length with that massive head, she’s got some girth. This a keel weighted lure with a very lightly scooped face. Has a large step down at the back of the head, also has V-shaped belly at the nose of the lure which rounds back off symmetrically in the rear. It does the dance and at the end of the day it’s always looking to bring the big girl home.

Comes with a rubber hook lock glued to the back of the head.

BOM 502 skirts.

This smooth running 10 inch-er is easy to love. Troll it slow, troll it fast, troll it long & hard, throw it in a mixed spread. The Ass Man is extremely versatile, very easy to set and can be thrown into just about any spread you want to pull. It can be put in any position, all weather. It is extremely stable and cycles beautifully even at speeds of 14 knots. 

All resin, no added weight.

BOM 502 Skirts

This is a 11-inch lure, similar to the V1, but with a slightly different taper and a smaller step at the rear of the head, bigger cup on the face but jetted the same. The V2 digs deeper and takes a lot of air down with it. Both versions have slightly different actions, yet both catch fish. The V2 will have more head shake when it is at the end of the cycle coming back up to the surface to get more air.

This is a great short rigger lure that will put fish in your boat.

All resin, no added weight.

BOM 502 skirts

Coming in at 11” overall length, the Bomb Version 1 has smooth double taper and a decently sized cupped face with 4 jets. To spice it up she has a large step at the back of the head. She is a fairly smooth-running lure with a beautiful swimming action. All weather, easy to set fish killer.

All resin, no added weight.

BOM 502 skirts

This big sucker comes in at 10 inches overall length. A scaled-up version of the small sucker that has a little more action and a lot more smoke with its larger jets while still being an easy lure to set and pull in your spread. Be prepared for some bill rash on these heads.

I like to pull it off the riggers, short & long. This lure holds to water exceptionally well and can be used in all positions. 

All resin, no added weight.

BOM 502 skirts

Dubbed the large “Butt Plug” sporting 8 jets and measures around 11 inches overall length.

This is an aggressive surface running lure. Produces a lot of smoke and wild head shaking. Unlike the smaller version this one is a little more difficult to set in the spread, she doesn’t like a lot of line angle and will try to come out of the water at the end of the cycle if the angle is too steep. I like to pull it from the short rigger position, she does need angle to cycle properly just not too much. When you get her set just right, she cycles beautifully. She is a fish raiser and will get the billfish fired up. Has passed the Blue Marlin test. I recommend using a loose hook rig.

I don’t build these often, if you are interested in one shoot me a message I can build to order.

BOM 502 skirts